Installation

Download the firmware~

Go to the releases page on GitHub to download the latest openHASP binaries.

Pick the one appropriate for ESP8266:

Note

You can also download the nightly openHASP firmware.zip file from the Actions tab on Github.

Install the firmware~

Flash ESP8266~

For ESP8266 you only need one single .bin file:

Using Tasmotizer (Windows)~

Using esp-tool.py~

When flashing the ESP8266 for the first time, it is best to erase the flash before uploading the new firmware:

esptool.py -p "COM1" erase_flash
esptool.py -p "COM1" write_flash --flash_mode qio 0x0 d1-mini-esp8266_ili9341_v0.3.2.bin

Change COM1 to the correct port on your computer and 4m to the correct size of the internal flash chip.